-
Tom Thibodeau replied to the topic Actuator Seals in the forum Hydraulic System – Meyers 200 2 years, 8 months ago
Gary,
Here are the O-ring part numbers for each of the M200 gear and the flap actuators:
3 each AN6227B-17 (MS28775-212)
1 each AN6227B-10 (MS28775-112)The flap and landing gear selector valve use the following seals
2 each MS2775-117
1 each 1161N52-204 . (They also have a reinforced high pressure double O-ring type seal, but it is a harder…[Read more] -
Tom Thibodeau replied to the topic Actuator Seals in the forum Hydraulic System – Meyers 200 2 years, 8 months ago
Gary,
I am currently on vacation and won’t be at my hangar until Labor Day weekend. I sent Robert Whitfield a complete set of seals, so he should have the part numbers. All are common O-rings available thru Aircraft Spruce, except the internal gear handle valve and flap selector valve. I found a compatible seal at McMaster Carr that is working f…[Read more] -
Dean Siracusa replied to the topic Currency of sale listings? in the forum Airframe – Meyers 200 2 years, 8 months ago
Some other owners contacted me and said my response was not as friendly as it should have been. My apologies.
Which airplane on the For Sale site is sold?
-
Dean Siracusa replied to the topic Currency of sale listings? in the forum Airframe – Meyers 200 2 years, 8 months ago
Which one are you saying that’s from 2019 and isn’t currently owned by them anymore?
The listings are only as good as the people posting them. If the owner doesn’t let us know that it’s sold, it’ll just remain there.
Remember, this isn’t some big fancy company with many employees. It’s a small group of owners of a very small population of aircraft.
-
Dean Siracusa and Philippe Moréno are now friends 2 years, 9 months ago
-
Tom Thibodeau replied to the topic Landing Gear strut seals in the forum General- Meyers 200 2 years, 9 months ago
Ed,
I’ve been told they may be rechromed without creating any issues. Please contact Ross Warner to see about finding new old stock parts. He may be able to point you to someone who knows where to find them if you decide to go that route.
VR, Tom
-
Dean Siracusa and Lowell Slatter are now friends 2 years, 9 months ago
-
Tom Thibodeau replied to the topic Meyers 200 Gear Failure in the forum Airframe – Meyers 200 2 years, 9 months ago
Ray,
So very happy to hear the damage was minimal given your scenario. Thank you for the additional information. I’m guessing the strut extended slightly once the gear was in the well to force the tire against the bail and cause it to bind. A very unusual situation to be certain.
You did an excellent 2 wheel landing and had a great outcome.…[Read more]
-
Mark Jensen replied to the topic Meyers 200 Gear Failure in the forum Airframe – Meyers 200 2 years, 10 months ago
Sorry to hear about your gear problem. My partner and I had a nose gear up landing which I also attributed to a problem with the strut. We bought the aircraft after an estate settlement and then had it down for about a year replacing the interior and glass. Because it sat for (?) years, it was difficult to service the strut to the proper…[Read more]
-
Dean Siracusa and Andy Nixon are now friends 2 years, 10 months ago
-
Dean Siracusa and Jeffrey Krahling are now friends 2 years, 10 months ago
-
Dean Siracusa and james ratliff are now friends 2 years, 10 months ago
-
Dean Siracusa and Joseph Gibbons are now friends 2 years, 10 months ago
-
Hello Dean, I am in fort lauderdale with Carl Richards who owns ac serial # 379 or N200D. The ac experienced a sudden stoppage in Burly, Id. last Aug. since then since then the mechanic (The Flight Doctor) says he cannot put the three bladed propeller back on the speed mod nose due to their being no STC or legal Form 337 on record. We have a 337…[Read more]
-
-
Dean Siracusa and Steven Vierhus are now friends 2 years, 10 months ago
-
Dean Siracusa and Thomas Kube are now friends 2 years, 10 months ago
-
Dean Siracusa and Troy Parlin are now friends 2 years, 10 months ago
-
Dean Siracusa and Ken Puls are now friends 2 years, 10 months ago
-
Dean Siracusa replied to the topic Meyers 200 Gear Failure in the forum Airframe – Meyers 200 2 years, 10 months ago
Hi Tom,
Ray’s right strut was flat and it took off with it in that condition. It apparently didn’t catch the bail and just went past it. When the gear came down the bail got in its way.Oh, and my new Meyers 200, N2980T (Tom Wathen’s old plane) has the same gear light system as N489C and I honestly prefer the original way they’re set up as I…[Read more]
-
Tom Thibodeau replied to the topic Meyers 200 Gear Failure in the forum Airframe – Meyers 200 2 years, 10 months ago
One additional tidbit…
A broken gear handle Uplock cable will be apparent because without the Uplock released, the gear UP red light will stay illuminated. Basically one red, two green would indicate the Uplock did not release on the gear indicating red. Instead of trying to find which cable to pull, raise the gear by putting the gear handle i…[Read more]
-
Tom Thibodeau replied to the topic Meyers 200 Gear Failure in the forum Airframe – Meyers 200 2 years, 10 months ago
Ray,
So sorry to hear about your gear extension issues with 489C. As you are aware (but others may not be), your aircraft has a different gear indicating system than other M200s. 489C has a transit lights, where stock aircraft have UP (red) and DOWN (green) lights.
The Gear system of the M200 is quite simple: an engine driven hydraulic pump…[Read more]
- Load More