Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 21, 2025 at 8:16 pm #2861
     Arne Vasenden
    Participant

    Has anyone tried to trim the intake baffle in front of #6 to allow additional cooling air? There is about a two inch lip that could be trimed down.

    June 26, 2024 at 9:29 pm #2773
     Arne Vasenden
    Participant

    just installed the garmin 500 auto pilot. Works good, Stein Air install with 337 Field Approval. No electric trim but the auto pilot is easy to use with out it. It will handle the up/down thermals with out re trimming during the level flight.

    June 26, 2024 at 9:23 pm #2772
     Arne Vasenden
    Participant

    Hello! Same issue with my new 200d #6 is hard to keep cool. Injectors good cowl flaps ok baffeling good. I switched the cold cyl injector with the # 6 not much better. I just need to watch it, Keep it cool with fuel and airspeed from the start. I need to run 2400rpm 21″ and 14+ gph to keep it under 380deg.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)