-
Steve Bauman and
Steve Windh are now friends 8 years ago
-
John Secord and
Steve Windh are now friends 8 years ago
-
John Secord and
Richard E Russell are now friends 8 years ago
-
John Secord and
Flip Colmer are now friends 8 years ago
-
Steve Bauman and
Steve Freeman are now friends 8 years ago
-
John Secord and
Steve Freeman are now friends 8 years ago
-
Jim Jones started the topic Air/Oil Separator for the OTW in the forum Meyers OTW 8 years ago
Ever since the restoration was complete in 1999, I have fought the good fight to keep oil off the belly of my plane. I tried rerouting the breather hose, adding more hose, cutting different angles on the end of the breather hose that stuck out of the fuselage. Nothing worked as I hoped. Then I bit the bullet and bought an Airwolf air/oil separator…[Read more]
-
John Secord changed their profile picture 8 years, 1 month ago
-
Jim Jones replied to the topic Meyers200D_N2976T-9632 in the forum 1966 Meyers 200D – N2976T 8 years, 2 months ago
Walk out front of your plane and look at it. Is it standing level or is one wing much lower than the other? Also, you tires should be vertical. If the top of the tire is leaning in, that could be a weak spring. For the tail, I don’t remember the exact measurement, but the trailing edge of the elevator should be about 11 or so inches off the…[Read more]
-
Jim Jones replied to the topic in the forum Jay Herrin 8 years, 3 months ago
Donald, it’s an honor to know someone that knew someone that knew Charles Lindbergh! That’s quite a story.
As far as three pointing the airplane, I try to do that on the grass. I’ve tried on hard surface but it’s not pretty. My now deceased friend, Captain Chuck Downey, who flew Helldivers in WWII off the USS Ticonderoga, three pointed no matter…[Read more]
-
Jim Jones replied to the topic Micco Sp26 in the forum 2001 Micco SP 26 Acrobatic Certified 8 years, 3 months ago
The only alternative to crawling back to the tail and greasing it from the inside is to grease it from the outside. First, I found a few things that make greasing from the inside a bit easier. Raise the tail to level, remove belt, shoes and anything that will get caught on anything and make sure you have everything before you go in! While in…[Read more]
-
Jim Jones replied to the topic Micco Sp26 in the forum 2001 Micco SP 26 Acrobatic Certified 8 years, 3 months ago
The only alternative to crawling back to the tail and greasing it from the inside is to grease it from the outside. First, I found a few things that make greasing from the inside a bit easier. Raise the tail to level, remove belt, shoes and anything that will get caught on anything and make sure you have everything before you go in! While in…[Read more]
-
Jim Jones replied to the topic in the forum Jay Herrin 8 years, 3 months ago
Donald,
Congrats to your dad for restoring and preserving a great piece of American aviation history! I’m glad that your OTW is alive and well. With your experience you shouldn’t have any problems with the OTW on pavement. If you can fly a Champ, you can fly the OTW. It’s an elegant lady!
In lieu of a published crosswind component, it comes down…[Read more]
-
Jamon Pruitt and
Dan McLeod are now friends 8 years, 5 months ago
-
Jim Jones and
John Secord are now friends 8 years, 5 months ago
-
Dean Siracusa started the topic 1953 Meyers MAC-145 in the forum 8 years, 5 months ago
TruTrak is currently working with the FAA to get their autopilots PMA approved for many GA aircraft. If you’re interested in adding one of their autopilots to your Meyers 200, just click through to this survey:
https://goo.gl/forms/hyXMDqC8aMjIeS3R2 -
Becky Jones and
Dean Siracusa are now friends 8 years, 5 months ago
-
Jim Jones and
Karen Wade are now friends 8 years, 5 months ago
-
Jamon Pruitt and
Karen Wade are now friends 8 years, 5 months ago
-
Jamon Pruitt and
Garry Elghammer are now friends 8 years, 5 months ago
- Load More