Paul Bruk

Paul Bruk changed their profile picture 11 months, 2 weeks ago
Paul Bruk started the topic Harris Ranch in the forum General 11 months, 2 weeks ago

Is there a Harris Ranch fly-in this year? Thanks.
Paul Bruk started the topic Curtis Fuel Valves in the forum Airframe – Meyers 200 2 years ago

Just replaced my fuel valves. I have a B model and my inboard tanks were 1/4 NPT. If your valves take a 9/16 wrench, it is the Curtis 1300 or 1600.
Paul Bruk started the topic Engine Cowl Fasteners in the forum Engine – Meyers 200 3 years, 4 months ago

Hi,

Does anyone know where I can get cowl fasteners, Philips head? One of them popped out.

Thank you!
Paul Bruk started the topic Towing in the forum General- Meyers 200 3 years, 6 months ago

What do you use for powered towing? I was thinking to get an ATV or golf cart.
Paul Bruk replied to the topic IFR GPS in the forum Avionics – Meyers 200 3 years, 7 months ago

For those who might be interested in the Garmin 175, the STC and AML are here.

https://rgl.faa.gov/Regulatory_and_Guidance_Library/rgstc.nsf/0/62018D7400B0F8CD862585AE004277E9?OpenDocument&Highlight=%20sa02636se

Approval is for
3A18 — Interceptor Aircraft Inc — 200
3A18 — Interceptor Aircraft Inc — 200A
3A18 — Interceptor Aircraft Inc –…[Read more]
Paul Bruk started the topic IFR GPS in the forum Avionics – Meyers 200 3 years, 7 months ago

Hi,

Looking to add an IFR GPS. Was thinking either the KLN 94 or the Garmin 175. I do not fly a lot of IFR and I am considering the KLN 94 simply because King says they will continue to support it as there are many units still in service. The main difference is WASS vs. Non-WAAS and cost.

Does anyone have a Flight Manual Supplement for the KLN…[Read more]
Paul Bruk started the topic Hyd Reservoir Dipstick in the forum Hydraulic System – Meyers 200 3 years, 7 months ago

Hi, Does anyone know where I can get a dipstick for the hydraulic reservoir? Thanks.
Paul Bruk replied to the topic Spool Valve Ball and Spring in the forum Hydraulic System – Meyers 200 3 years, 8 months ago

The spool valve is the box mounted to the firewall with all the hydraulic lines attached. The front safety wired nut has a spring and a ball fitting.
Dean Siracusa and Paul Bruk are now friends 3 years, 8 months ago
Paul Bruk started the topic Spool Valve Ball and Spring in the forum Hydraulic System – Meyers 200 3 years, 8 months ago

Does anyone have a source for a new ball and spring for the spool valve?
Paul Bruk became a registered member 6 years ago