@abryanwade
-
Joseph Gibbons posted an update 3 years, 5 months ago
Looking for dimensions on door seals for 200D. Anyone have info? Working on annual for N200D trying to get door seal from leaking.
-
Joseph Gibbons posted an update 3 years, 5 months ago
Ad is coming on the IO-520 with the F&M oil filter adaptor on April 04,2022. Make sure all follow instructions and torque properly. Ours started leaking on a rebuild right out of the shop improperly torqued. Follow maintenance procedures and Fly Safe.
-
Joseph Gibbons posted an update 3 years, 5 months ago
Hello All, Good news for me and Carl Richards. Finally picked up N200D from Burley ,Idaho after 1 year and 5 month repair and compliance work for the modification done in 1987 without the proper paperwork. I worked very hard on the paperwork and research end to gain acceptance. The aircraft is now legal. If interested check out flight aware for…[Read more]
-
Hugh Mattern's profile was updated 3 years, 6 months ago
-
Jay McLeod and
Hugh Mattern are now friends 3 years, 6 months ago
-
Jay McLeod and
Ashley Wade are now friends 3 years, 7 months ago -
Karen Wade wrote a new post 3 years, 7 months ago
After a successful 2021 Meyers Aircraft Owners Association Fly-In and reunion that took place in Fredericksburg, TX, plans are well under way for our 2022 event in Bentonville, Arkansas at KVBT
-
Garry Elghammer and
Mark Young are now friends 3 years, 8 months ago
-
Joseph Gibbons posted an update 3 years, 9 months ago
@dep196m Ed, spoke with Dave Smith and he removed the clip from a strut he had in storage. Thank the airplane gods for Dave ! Dont really have a part number though it seems to be a standard beveled layer clip.
-
Thanks Ed and Dave!
-
-
Joseph Gibbons replied to the topic Meyers 200D in the forum Meyers OTW 3 years, 9 months ago
need the clip at the top of the strut.
-
Joseph Gibbons and
Ross Warner are now friends 3 years, 10 months ago
-
Joseph Gibbons and
Gary Harber are now friends 3 years, 10 months ago -
Joseph Gibbons and
Gary are now friends 3 years, 10 months ago
-
Joseph Gibbons and
Dan McLeod are now friends 3 years, 10 months ago -
Joseph Gibbons started the topic Meyers 200D in the forum Meyers OTW 3 years, 10 months ago
looking for nose gear assembly parts list (C clip) anyone can help/ Thanks
-
Joseph Gibbons replied to the topic Parts in the forum Meyers 200 3 years, 10 months ago
Looking for parts list for nose gear assembly for N200D anyone?
-
Joseph Gibbons replied to the topic 3-Blade McCauley D3A34C404/80VA-0 Prop on a 200D in the forum Meyers 200 3 years, 10 months ago
hello Greg, thanks for your diligence and approval. We are now set. Thanks again Joe Gibbons. N200D
-
Jim Jones replied to the topic Aiecraft rigging in the forum General – Meyers OTW 4 years ago
Jeff, glad to hear the Restoration is complete. If the rigging was done according to the manual, that is, it has the correct dihedral in the upper wing and all the control surfaces are set per the manual the only thing left is to make sure all wires are properly tightened and go fly it to see how it worked out. May need to adjust the trailing edge…[Read more]
-
Steve Bauman and
Michael Barg are now friends 4 years ago
-
Joseph Gibbons started the topic Meyers 200D in the forum Meyers OTW 4 years ago
Does anyone out there have a Flight Manual Supplement for a Meyers 200D model. One with a three bladed prop conversion?
- Load More
