-
Steve Bauman replied to the topic Any info available for balancing control surfaces? in the forum Flight Controls – Meyers 200 2 years ago
Hi guys
The flight controls on the Meyers 200 do NOT need to be balanced when painted. They are controlled by push –pull rods. Aircraft that have control CABLES they are the ones that need to be balanced if painted.
This from the FAA.
Steve Bauman -
Steve Bauman replied to the topic Io550 info in the forum Engine – Meyers 200 2 years ago
Also on ANOTHER change to the IO550-F engine is the 2 bladed prop on the IO520-A is 82 inches, the IO550-F engine requires a 2 bladed prop to be 84 inches.
-
Hugh Mattern's profile was updated 2 years, 2 months ago
-
Jay McLeod and Hugh Mattern are now friends 2 years, 2 months ago
-
Dean Siracusa replied to the topic Elevator trim control cable in the forum Flight Controls – Meyers 200 2 years, 2 months ago
Did the cable break or is it just bound up? If it’s bound up, the process is to remove it, hang it up from the ceiling and pour Kroil penetrating oil into it, until it’s leaking out the bottom. Let it stay there for several days before reinstalling.
Also, regular checking of the elevator trim prior to each flight will also help keep it unb…[Read more]
-
Dean Siracusa replied to the topic F&M Oil Filter adapter in the forum Engine – Meyers 200 2 years, 2 months ago
Yes, the Airwolf is mounted on the firewall. I’ve heard good things about it. My only concern is a hose failure would be catastrophic.
With regards to the F&M (now owned by Tempest), I used one on my IO-520 for years. The only time I had an issue is when a new mechanic would not understand the requirements.
First is that each time the a…[Read more]
-
Dean Siracusa replied to the topic IFR GPS in the forum Avionics – Meyers 200 2 years, 2 months ago
I’d definitely pick the Garmin over the King. The KLN 94 is old, clunky and slow compared to the newer Garmin 175.
Also, figure that any of these companies will likely only support their GPS products for 10 years or less after production ends. Production on the KLN 94 has been out of production for a while now, so the clock is ticking. And, t…[Read more]
-
Jay McLeod and Ashley Wade are now friends 2 years, 2 months ago
-
Ashley Wade replied to the topic F&M Oil Filter adapter in the forum Engine – Meyers 200 2 years, 2 months ago
Hello Ed. My plane came with an Air Wolf Oil Filter Adapter when I bought her. 7 years of trouble free / Leak free service. I later purchased an Air Wolf AOS and the folks there were very helpful.
-
Ashley Wade replied to the topic Elevator trim control cable in the forum Flight Controls – Meyers 200 2 years, 2 months ago
Greetings Scott. I would suggest an email to our own 200 parts guru Mr. Dave Smith at davesf17@yahoo.com.
-
Karen Wade wrote a new post, Fly-In News! 2 years, 2 months ago
After a successful 2021 Meyers Aircraft Owners Association Fly-In and reunion that took place in Fredericksburg, TX, plans are well under way for our 2022 event in Bentonville, Arkansas at KVBT
-
Dan McLeod replied to the topic Hyd Reservoir Dipstick in the forum Hydraulic System – Meyers 200 2 years, 3 months ago
Harold Settle did have those.
-
Dean Siracusa replied to the topic Spool Valve Ball and Spring in the forum Hydraulic System – Meyers 200 2 years, 4 months ago
Did they get lost or break? We lost the ball we had, ordered an entire bag of them! I don’t have the spring though.
-
Ashley Wade replied to the topic Meyers 145 in the forum General – Meyers 145 / MICCO SP20/SP26 2 years, 4 months ago
Hello Steve. Please contact Dr. Jamon Pruitt. He’s a current 145 owner as well as 200 owner. He did a great job of upgrading his 145 and can tell you about parts availability. If you talk nice to him he might even part with his gorgeous 145…
-
Ashley Wade replied to the topic Meyers 200D in the forum Meyers OTW 2 years, 4 months ago
Hello Joseph. Perhaps member Dave Smith could help you out. He has many NOS parts. Contact him at davesf17@yahoo.com ,
-
Dean Siracusa replied to the topic *PAN PAN* Garmin GFC500 Available in Meyers 200! *PAN PAN* in the forum Avionics – Meyers 200 2 years, 4 months ago
The Meyers 200 does have electric trim available as an option when installing the Century autopilots such as the 2000. And, it’s been installed in the latest Garmin installation just last month.
Peter, your plane originally had the Brittain autopilot correct? The Century A/P is a very different installation since its servos are electric instead…[Read more]
-
Dean Siracusa and Joe Martony are now friends 2 years, 4 months ago
-
Dean Siracusa and Paul Bruk are now friends 2 years, 4 months ago
-
Dean Siracusa and Steve Ouellet are now friends 2 years, 4 months ago
-
Dean Siracusa and Jim Abbott are now friends 2 years, 4 months ago
- Load More