https://www.meyersaircraft.org/members/jmgrpgbellsouth-net/activity/ Activity feed for Joseph Gibbons. Thu, 02 Apr 2026 01:14:43 +0000 https://buddypress.org/?v= en-US 30 hourly 2 6dc5a53a9777e7e6c16e47b879ae2ad4 https://www.meyersaircraft.org/activity/p/4666/ Mon, 26 Aug 2024 21:30:31 +0000 0 91661b8d9a474cf8f4763ac5c3c54328 https://www.meyersaircraft.org/activity/p/2871/ Thu, 02 Jun 2022 16:49:26 +0000 0 1354b755bcf15461722d8b26349fdbbb https://www.meyersaircraft.org/activity/p/2851/ Sat, 16 Apr 2022 14:44:34 +0000 @abryanwade Like Dean said you can lube it , I have lubed mine by removing side panel and airblowing lube thru cable back to the control box.

]]> 0 cc8c7c077e3745aae2787048452c90ae https://www.meyersaircraft.org/activity/p/2848/ Sun, 03 Apr 2022 11:36:50 +0000 Checked up on the AD I said is coming out, and I cannot find anything on it. So for now disregard. Apparently the information given to me from a mechanic in KAPA does not check out. Sorry for the misinformation, not good on my behalf. Apologies.

]]> 0 0427dcc38cb3696369b36fedf500f81e https://www.meyersaircraft.org/forums/topic/fm-oil-filter-adapter/#post-2437 Sun, 03 Apr 2022 11:11:09 +0000 New AD calls for removal of the teflon gasket at the base of the F&M adapter to be replaced with a crushed seal gasket. Also adapter must be torqued to 65 ft. lbs. every twelve hrs. I searched the FAA site fir the AD but it has not been posted yet. I followed the ad procedure and twelve hours later the top of the adapter had already began to seep…[Read more]

]]> 0 d64a47fd9c7727fdb2f02189b80efc7e https://www.meyersaircraft.org/activity/p/2846/ Fri, 01 Apr 2022 18:28:02 +0000 Looking for dimensions on door seals for 200D. Anyone have info? Working on annual for N200D trying to get door seal from leaking.

]]> 0 a4af9967ee0eea377d86635062a2f494 https://www.meyersaircraft.org/activity/p/2844/ Mon, 28 Mar 2022 23:20:06 +0000 Ad is coming on the IO-520 with the F&M oil filter adaptor on April 04,2022. Make sure all follow instructions and torque properly. Ours started leaking on a rebuild right out of the shop improperly torqued. Follow maintenance procedures and Fly Safe.

]]> 0 5de28f718e4fa7234a55239006328d6a https://www.meyersaircraft.org/activity/p/2843/ Mon, 28 Mar 2022 23:10:35 +0000 Hello All, Good news for me and Carl Richards. Finally picked up N200D from Burley ,Idaho after 1 year and 5 month repair and compliance work for the modification done in 1987 without the proper paperwork. I worked very hard on the paperwork and research end to gain acceptance. The aircraft is now legal. If interested check out flight aware for…[Read more]

]]> 0 3b4eb1dd709e508595d6a6e5476bd7e4 https://www.meyersaircraft.org/activity/p/1807/#acomment-2762 Fri, 10 Dec 2021 16:16:26 +0000 Peter, Hi ! Joe Gibbons here. Tank status availability is limited. They can be repaired however caution must be used when adding air, they will expand quickly. Dave Smith may have one! Call him @ 763-228-6533 tell him I sent you. Thanks Joe Gibbons

In reply to - Peter Weiss started the topic Fuel tanks 200D in the forum Interiors – Meyers 200 I am new to Meyers.org. I am interested in the fuel tank description. Fuel cells? If so are replacement cells readily […] ]]> 6af9b9130372361ef424c4a6ebee13e7 https://www.meyersaircraft.org/activity/p/2754/#acomment-2761 Fri, 10 Dec 2021 16:05:14 +0000 No help from global, put a couple calls in no results, Dave Smith was the savior on this one. Thanks Dave.

In reply to - Ed Pulliam replied to the topic Meyers 200D in the forum Meyers OTW Joseph-the type certificate was purchased by Global Parts Group. I am recalling an exploded nose gear schematic that might have a parts listing. […] ]]> 00ca3791a045e0c25ffe98bef8588450 https://www.meyersaircraft.org/activity/p/2758/#acomment-2760 Fri, 10 Dec 2021 16:03:10 +0000 Thanks Ed and Dave!

In reply to - Joseph Gibbons posted an update @dep196m Ed, spoke with Dave Smith and he removed the clip from a strut he had in storage. Thank the airplane gods for Dave ! Dont really have a part number though it seems to be a […] ]]> 7728b32b52a322e5f6c926adb18a16e0 https://www.meyersaircraft.org/activity/p/2754/#acomment-2759 Fri, 10 Dec 2021 16:02:45 +0000 Got one from Dave Smith. Oh thank heaven for Dave!

In reply to - Ed Pulliam replied to the topic Meyers 200D in the forum Meyers OTW Joseph-the type certificate was purchased by Global Parts Group. I am recalling an exploded nose gear schematic that might have a parts listing. […] ]]> 7b12f14a0b2993e2ac4ca09e584b63f3 https://www.meyersaircraft.org/activity/p/2758/ Fri, 10 Dec 2021 16:01:50 +0000 @dep196m Ed, spoke with Dave Smith and he removed the clip from a strut he had in storage. Thank the airplane gods for Dave ! Dont really have a part number though it seems to be a standard beveled layer clip.

]]> 1 7e121b549e5cc74ea3be6dc0ca581bde http://www.meyersaircraft.org/forums/topic/meyers-200d-2/#post-2373 Thu, 02 Dec 2021 17:21:15 +0000 need the clip at the top of the strut.

]]> 0 063e3b31bd44a9c18dd5b111333b4447 https://www.meyersaircraft.org/activity/p/2719/#acomment-2756 Wed, 01 Dec 2021 16:47:10 +0000 Finally received a legitimate sign off from the FAA for the three bladed prop on Carl Richards N200D after six months of digging through the paperwork had to add a flight manual supplement for the IO 520A and nose bowl conversion, but the Form337 with field approval is complete. My research showed that way back when his conversion was done the…[Read more]

In reply to - Ed Pulliam replied to the topic 3-Blade McCauley D3A34C404/80VA-0 Prop on a 200D in the forum Meyers 200 Gregg-Dean Siracusa has a 3 blade on his 200D. Not sure if same as your specs. ]]> 73ec8da127750ab09501aaed247e113f https://www.meyersaircraft.org/activity/p/2754/#acomment-2755 Wed, 01 Dec 2021 16:40:36 +0000 Ed I am looking for the cir clip at the top of the strut. Looking for any info ,I will try Global to find the ipc for the gear if I can only figure out who manufactured them.

In reply to - Ed Pulliam replied to the topic Meyers 200D in the forum Meyers OTW Joseph-the type certificate was purchased by Global Parts Group. I am recalling an exploded nose gear schematic that might have a parts listing. […] ]]> 3c3758f1e4db0653f1a5585ac6c7cf6d https://www.meyersaircraft.org/activity/p/2753/ Fri, 26 Nov 2021 14:29:05 +0000 0 356f6669ea8dc38aa379bb37c78b7b97 https://www.meyersaircraft.org/activity/p/2752/ Thu, 25 Nov 2021 21:43:07 +0000 0 403594d1e32096f7127c51c87884448d https://www.meyersaircraft.org/activity/p/2751/ Thu, 25 Nov 2021 17:42:30 +0000 0 d3958a973fc59d1c1e38b2e0b172eaba https://www.meyersaircraft.org/activity/p/2750/ Thu, 25 Nov 2021 14:05:12 +0000 0 293f376ed87826d2ef65d0d701fe31c0 http://www.meyersaircraft.org/forums/topic/meyers-200d-2/ Thu, 25 Nov 2021 11:15:38 +0000 looking for nose gear assembly parts list (C clip) anyone can help/ Thanks

]]> 0 f6e8c813a7dc63d4323bd83549220c1d http://www.meyersaircraft.org/forums/topic/parts/#post-2370 Thu, 25 Nov 2021 11:13:31 +0000 Looking for parts list for nose gear assembly for N200D anyone?

]]> 0 06740368b1541d0f4b5297d92d34e259 http://www.meyersaircraft.org/forums/topic/3-blade-mccauley-d3a34c404-80va-0-prop-on-a-200d/#post-2369 Thu, 25 Nov 2021 11:11:12 +0000 hello Greg, thanks for your diligence and approval. We are now set. Thanks again Joe Gibbons. N200D

]]> 0 dc24f858adb6747d64216a70996680c5 http://www.meyersaircraft.org/forums/topic/meyers-200d/ Thu, 09 Sep 2021 11:14:51 +0000 Does anyone out there have a Flight Manual Supplement for a Meyers 200D model. One with a three bladed prop conversion?

]]> 0 94e435abf2fde9fed6faff2970c07273 https://www.meyersaircraft.org/activity/p/2651/ Fri, 16 Jul 2021 20:06:19 +0000 has anyone had the speed modification to the nose of their aircraft with a two bladed propeller? If so can you get in touch with me. Our meyers N200D is still stuck in Burley I.D. It seems that the speed mod with the three bladed propeller issued with STC 1241SO TC 3A18 is for a cessna 204 with a cont. 520A. Trying to get this all sorted out. I…[Read more]

]]> 0 8cb7ef32363947b46dfba50af9ed80c3 https://www.meyersaircraft.org/activity/p/2624/#acomment-2625 Wed, 23 Jun 2021 10:37:36 +0000 Hello Dean, I am in fort lauderdale with Carl Richards who owns ac serial # 379 or N200D. The ac experienced a sudden stoppage in Burly, Id. last Aug. since then since then the mechanic (The Flight Doctor) says he cannot put the three bladed propeller back on the speed mod nose due to their being no STC or legal Form 337 on record. We have a 337…[Read more]

In reply to - Dean Siracusa and Joseph Gibbons are now friends ]]> 355fffeaf3b5747368332979339181af http://www.meyersaircraft.org/forums/topic/meyers-200-engine-mount/#post-2202 Thu, 18 Feb 2021 01:03:20 +0000 Ray, I have the same problem our aircraft N200D is at Burley Idaho being repaired and cant seem to fine the part number for the engine mounts for Continental 520 can you help. Call me 954-914-5763

]]> 0 0950b1ea43c89721c918b1278c2015d4 https://www.meyersaircraft.org/activity/p/2299/ Tue, 06 Oct 2020 23:26:08 +0000 Meyers # N200D serial # 379. Out of KFXE. Thank You all.

]]> 0 5becc3fab5e88ecd751150bac7e7f16e https://www.meyersaircraft.org/activity/p/2298/ Tue, 06 Oct 2020 23:25:18 +0000 Trying to get some info on the STC for three bladed props . My friend and Meyers owner Carl Richards nose wheel failed to deploy recently in Burly Idaho and prop was damaged. Shop keeps telling us they need the STC for the three blade Mc Cauley prop. I cant find the number anywhere. Can anyone help Carl out and I out ?

]]> 0 207ea68b4326f065a76959bda54b03ed https://www.meyersaircraft.org/activity/p/2091/ Mon, 11 May 2020 16:03:15 +0000 0 2330a903e5e36b23883c1a34f1216464 https://www.meyersaircraft.org/activity/p/2087/ Sat, 09 May 2020 12:36:12 +0000 0