-
Jacob Kingsley and
Richard E Russell are now friends 7 years, 10 months ago -
Jacob Kingsley and
jim rahm are now friends 7 years, 10 months ago
-
Karen Wade and
Linda Betzoldt are now friends 7 years, 10 months ago
-
Jacob Kingsley and
Linda Betzoldt are now friends 7 years, 10 months ago
-
Jacob Kingsley and
Duane A. Brown are now friends 7 years, 10 months ago
-
Jacob Kingsley and
Hinrik Hjaltason are now friends 7 years, 10 months ago -
Jacob Kingsley and
Thomas Kube are now friends 7 years, 10 months ago
-
Jacob Kingsley changed their profile picture 7 years, 10 months ago
-
Jacob Kingsley's profile was updated 7 years, 10 months ago
-
John Secord and
Jacob Kingsley are now friends 7 years, 10 months ago -
Steve Bauman and
Jacob Kingsley are now friends 7 years, 10 months ago -
Karen Wade and
Jacob Kingsley are now friends 7 years, 10 months ago -
John Secord and
Jacob Kingsley are now friends 7 years, 10 months ago -
Thomas Kube replied to the topic Vernier Controls in the forum Engine – Meyers 200 7 years, 10 months ago
That would be great:
E-Mail is thomas_kube@me.com -
Ed Pulliam replied to the topic Vernier Controls in the forum Engine – Meyers 200 7 years, 10 months ago
Thomas-I replaced all 3 when I did my FWF winter 16/17. I used MacFarlane. Really nice to have new stuff. I can send you the measurements my A&P took that we sent off to MacFarlane. My mixture knob was a mess so I decided to replace the knobs as well.
-
Thomas Kube started the topic Vernier Controls in the forum Engine – Meyers 200 7 years, 10 months ago
The Meyers needs all three Verniers new. Does anybody know which length they have and which brand fits best? Hate to loose the old knobs. Could anybody save them?
Thomas
-
Oliver Wallace replied to the topic Meyers OTW in the Vintage Air Rally in the forum Meyers OTW 7 years, 10 months ago
Dick,
Apologies for not getting back on here sooner, there were some long delays in the entire application process and some participants had taken options out on Aircraft only for the entire Vintage Air Rally to be delayed until November of this year (http://www.facebook.com/VintageAirRally/posts/711618692365677).
Along with that, although I was…[Read more]
-
Dean Siracusa replied to the topic Hydraulic aileron trim in the forum Airframe – Meyers 200 7 years, 10 months ago
Definitely check the rigging of the ailerons as well as the flaps. And, the flaps have a unique bushing on them that are asymmetrical. If one of them is replaced with an incorrect bushing, it may be a cause of your issue.
Also, since you have a D model 200, check the spring for the aileron trim which is under the front seat. Either remove the…[Read more]
-
Thomas Kube replied to the topic Hydraulic aileron trim in the forum Airframe – Meyers 200 7 years, 10 months ago
Hi, my plane also turns right. aileron trip I ineffective. The Brittain B4 AP has a wing leveller which also see permanent left aileron input.
I noticed that the left aileron is not in line with the trailing edges of the flap and with the wing tip. In flight it is showing a slight drop at the flap side which induces the right wing low attitude and…[Read more] -
Thomas Kube replied to the topic Landing lights glasses in the forum Airframe – Meyers 200 7 years, 10 months ago
We made a top and bottom mold for the plexiglass to precise. Works great.
Thomas.
- Load More