Friends – Activity – Ross Warner – Meyers Aircraft Owners Association

Joseph Gibbons posted an update 4 years ago

Checked up on the AD I said is coming out, and I cannot find anything on it. So for now disregard. Apparently the information given to me from a mechanic in KAPA does not check out. Sorry for the misinformation, not good on my behalf. Apologies.
Joseph Gibbons replied to the topic F&M Oil Filter adapter in the forum Engine – Meyers 200 4 years ago

New AD calls for removal of the teflon gasket at the base of the F&M adapter to be replaced with a crushed seal gasket. Also adapter must be torqued to 65 ft. lbs. every twelve hrs. I searched the FAA site fir the AD but it has not been posted yet. I followed the ad procedure and twelve hours later the top of the adapter had already began to seep…[Read more]
Joseph Gibbons posted an update 4 years ago

Looking for dimensions on door seals for 200D. Anyone have info? Working on annual for N200D trying to get door seal from leaking.
Joseph Gibbons posted an update 4 years ago

Ad is coming on the IO-520 with the F&M oil filter adaptor on April 04,2022. Make sure all follow instructions and torque properly. Ours started leaking on a rebuild right out of the shop improperly torqued. Follow maintenance procedures and Fly Safe.
Joseph Gibbons posted an update 4 years ago

Hello All, Good news for me and Carl Richards. Finally picked up N200D from Burley ,Idaho after 1 year and 5 month repair and compliance work for the modification done in 1987 without the proper paperwork. I worked very hard on the paperwork and research end to gain acceptance. The aircraft is now legal. If interested check out flight aware for…[Read more]
Ed Pulliam replied to the topic Towing in the forum General- Meyers 200 4 years ago

I have a SideWinder and it has worked well. I think a golf cart with appropriate hardware is the ticket.
Hugh Mattern's profile was updated 4 years ago
Jay McLeod and Hugh Mattern are now friends 4 years ago
Ed Pulliam replied to the topic F&M Oil Filter adapter in the forum Engine – Meyers 200 4 years ago

Thanks for sending the SB Dean. We had seen it before and reinstalled per the instructions. I need to make sure we are using the correct crush washers though. And we had torqued to 65 ft lbs as well. Will try again!
Dean Siracusa replied to the topic Elevator trim control cable in the forum Flight Controls – Meyers 200 4 years, 1 month ago

Did the cable break or is it just bound up? If it’s bound up, the process is to remove it, hang it up from the ceiling and pour Kroil penetrating oil into it, until it’s leaking out the bottom. Let it stay there for several days before reinstalling.

Also, regular checking of the elevator trim prior to each flight will also help keep it unb…[Read more]
Dean Siracusa replied to the topic F&M Oil Filter adapter in the forum Engine – Meyers 200 4 years, 1 month ago

Yes, the Airwolf is mounted on the firewall. I’ve heard good things about it. My only concern is a hose failure would be catastrophic.

With regards to the F&M (now owned by Tempest), I used one on my IO-520 for years. The only time I had an issue is when a new mechanic would not understand the requirements.

First is that each time the a…[Read more]
Dean Siracusa replied to the topic IFR GPS in the forum Avionics – Meyers 200 4 years, 1 month ago

I’d definitely pick the Garmin over the King. The KLN 94 is old, clunky and slow compared to the newer Garmin 175.

Also, figure that any of these companies will likely only support their GPS products for 10 years or less after production ends. Production on the KLN 94 has been out of production for a while now, so the clock is ticking. And, t…[Read more]
Ed Pulliam replied to the topic F&M Oil Filter adapter in the forum Engine – Meyers 200 4 years, 1 month ago

Thank you Ashley. Is it mounted on the firewall?
Jay McLeod and Ashley Wade are now friends 4 years, 1 month ago
Ashley Wade replied to the topic F&M Oil Filter adapter in the forum Engine – Meyers 200 4 years, 1 month ago

Hello Ed. My plane came with an Air Wolf Oil Filter Adapter when I bought her. 7 years of trouble free / Leak free service. I later purchased an Air Wolf AOS and the folks there were very helpful.
Ashley Wade replied to the topic Elevator trim control cable in the forum Flight Controls – Meyers 200 4 years, 1 month ago

Greetings Scott. I would suggest an email to our own 200 parts guru Mr. Dave Smith at davesf17@yahoo.com.
Karen Wade wrote a new post 4 years, 1 month ago

After a successful 2021 Meyers Aircraft Owners Association Fly-In and reunion that took place in Fredericksburg, TX, plans are well under way for our 2022 event in Bentonville, Arkansas at KVBT
Ed Pulliam replied to the topic Hyd Reservoir Dipstick in the forum Hydraulic System – Meyers 200 4 years, 1 month ago

Paul-Harold has the solution!
Dan McLeod replied to the topic Hyd Reservoir Dipstick in the forum Hydraulic System – Meyers 200 4 years, 1 month ago

Harold Settle did have those.
Ed Pulliam replied to the topic Hyd Reservoir Dipstick in the forum Hydraulic System – Meyers 200 4 years, 2 months ago

Paul, one of our members has been selling a replacement that is more secure and easier to read. Let me see if I can find the paperwork.
Load More