@deansiracusa
-
Karen Wade and
Jacob Kingsley are now friends 7 years, 10 months ago -
Thomas Kube replied to the topic Vernier Controls in the forum Engine – Meyers 200 7 years, 10 months ago
That would be great:
E-Mail is thomas_kube@me.com -
Ed Pulliam replied to the topic Vernier Controls in the forum Engine – Meyers 200 7 years, 10 months ago
Thomas-I replaced all 3 when I did my FWF winter 16/17. I used MacFarlane. Really nice to have new stuff. I can send you the measurements my A&P took that we sent off to MacFarlane. My mixture knob was a mess so I decided to replace the knobs as well.
-
Thomas Kube started the topic Vernier Controls in the forum Engine – Meyers 200 7 years, 10 months ago
The Meyers needs all three Verniers new. Does anybody know which length they have and which brand fits best? Hate to loose the old knobs. Could anybody save them?
Thomas
-
Thomas Kube replied to the topic Hydraulic aileron trim in the forum Airframe – Meyers 200 7 years, 10 months ago
Hi, my plane also turns right. aileron trip I ineffective. The Brittain B4 AP has a wing leveller which also see permanent left aileron input.
I noticed that the left aileron is not in line with the trailing edges of the flap and with the wing tip. In flight it is showing a slight drop at the flap side which induces the right wing low attitude and…[Read more] -
Thomas Kube replied to the topic Landing lights glasses in the forum Airframe – Meyers 200 7 years, 10 months ago
We made a top and bottom mold for the plexiglass to precise. Works great.
Thomas.
-
Ed Pulliam started the topic Annual Inspection in the forum Airframe – Meyers 200 7 years, 11 months ago
Friends-196M just came out of annual. An item I bring to your attention and unfortunately I do not have pictures. The wing walk area is strengthened by 3 vertical steel supports that are welded to the tubing and riveted top and bottom to the wing surfaces. They are inboard of the flaps and can be seen when the flaps are fully deployed. All 3…[Read more]
-
Ed Pulliam replied to the topic Hydraulic aileron trim in the forum Airframe – Meyers 200 7 years, 11 months ago
Dean-If I recall, if an A/P is installed, the system then becomes inop so as to not interfere with the A/P servos, right?
Dan-does the bird have an A/P?
-
Mark Young replied to the topic STC Approval Approaching – S-Tec 3100 in the forum Avionics – Meyers 200 7 years, 11 months ago
Btw, just fired off an email to stec to ask. Not holding my breath.
-
Mark Young replied to the topic STC Approval Approaching – S-Tec 3100 in the forum Avionics – Meyers 200 7 years, 11 months ago
I’m a little confounded by this headline… Are you implying that they would consider an STC to include the Meyers? The last time I asked it was 100K + some guaranteed number of sales (maybe 6).
-
John Secord wrote a new post 7 years, 11 months ago
On December 6, 2017, my father’s ashes found their final resting place in Arlington National Cemetery.
Joining, was my family: Margaret, Elizabeth, Becci & Dan, and Megan & Dan, Meyers aircraft owners: Marv
-
John Secord wrote a new post 7 years, 11 months ago
There is a place in South Carolina that is being set up as the new center of the Meyers OTW universe, the vortex of biplane aeronautica and the home for OTW restoration.
How this whole idea got started, I
-
Richard E Russell and
greg grouleff are now friends 7 years, 11 months ago
-
Richard E Russell and
Duane A. Brown are now friends 7 years, 11 months ago
-
Richard E Russell and
Ed Pulliam are now friends 7 years, 11 months ago
-
Kent Aitchison and
Karen Wade are now friends 7 years, 11 months ago -
Richard E Russell and
nelson harding are now friends 7 years, 11 months ago
-
Richard E Russell and
Phil W. Hart are now friends 7 years, 11 months ago
-
Richard E Russell and
Mark Gardner are now friends 7 years, 11 months ago
-
Richard E Russell and
Jay McLeod are now friends 7 years, 11 months ago - Load More
