@dmcleodbpsnetworks-com
-
Garry Elghammer and
nelson harding are now friends 5 years, 1 month ago
-
Garry Elghammer and
Sam Raymer are now friends 5 years, 1 month ago
-
Karen Wade wrote a new post 5 years, 2 months ago
A Zoom meeting was held last week with the elected officers of the Meyers Aircraft Owners Association (MAOA) along with two additional esteemed MAOA members to discuss the status of our annual Fly-In
-
Dean Siracusa replied to the topic Window and windshield 200D in the forum Airframe – Meyers 200 5 years, 2 months ago
Windows that are thicker than standard are also heavier, which is likely why there’s an issue with the FAA.
-
Tom Thibodeau and
TC Gromer are now friends 5 years, 2 months ago
-
Tom Thibodeau and
Ken Rizer are now friends 5 years, 2 months ago
-
Tom Thibodeau and
Ed Pulliam are now friends 5 years, 2 months ago
-
Richard E Russell replied to the topic tail wheel boots? in the forum Airframe – Meyers OTW 5 years, 2 months ago
Code 4, disregard my post – I have ‘particular’/thorough wrench and IA and that’s great – however, since I posted this, I’ve again realized, a tail boot for our OTW is rarely available. Although I do fly off grass, I just do a thorough pre-flight focused especially on the tail wheel area. It’s grear to have particular mechanics by the way!
-
Karen Wade replied to the topic tail wheel boots? in the forum Airframe – Meyers OTW 5 years, 2 months ago
Yes. We removed the tailwheel boots on “Fly Navy” to service the bearing and the rear suspension. I can trace if for you if you need me to.
-
Tom Thibodeau replied to the topic Assets Of Meyers 200 Business in the forum General 5 years, 2 months ago
Global made a presentation at last year’s fly-in in FL. They hired a market specialist to actively search for a buyer. Their plan was to keep all of the assets (TC, fixtures, parts, M400, and 2918T) together as a package sale. If they were not able to sell the entire package, Nin George said they would contact our Association prior to d…[Read more]
-
Tom Thibodeau and
Hans are now friends 5 years, 2 months ago
-
Tom Thibodeau replied to the topic landing gear placards/decals in the forum Landing Gear – Meyers 200 5 years, 2 months ago
Mark,
I believe I have one in my stash of parts. I’ll check next trip to my hangar in a week or so. Do you need them for the mains as well? I’ll let you know what I find …
Have you asked Joan Diver about them?
r, Tom Thibodeau
757.870.2474 -
Tom Thibodeau replied to the topic tail wheel boots? in the forum Airframe – Meyers OTW 5 years, 2 months ago
DIck,
Did you get your boot?
R, Tom
-
Tom Thibodeau replied to the topic Noise certificate in the forum Meyers 200 5 years, 2 months ago
Thomas,
I’m not familiar with a noise certificate being issued for the M200, but Marv Rogge had to complete noise testing when he installed the IO-550 with a 2 bladed prop on his aircraft. He or Steve Bauman may be able to answer if a “stock” certificate exists.
R, Tom
-
Tom Thibodeau replied to the topic Conversation in the forum Meyers 200 5 years, 2 months ago
Mark,
Sounds like your elevator trim is now correctly rigged. It should require 4 half turns (2 full turns) from full nose down to set at take-off position.
VR, Tom
-
Mark Jensen replied to the topic Conversation in the forum Meyers 200 5 years, 2 months ago
Hi Ed,
I have a lot of IFR experience with military and airline flying but it is a bigger challenge with no autopiot or flight directer. I try to avoid actual weather approaches but practice one or two approaches on nearly every flight just in case I have to make one in actual weather. I approach the FAF at 120 mph and configure gear and flaps…[Read more] -
Mark Jensen replied to the topic landing gear placards/decals in the forum Landing Gear – Meyers 200 5 years, 2 months ago
I don’t think they are required.
-
Karen Wade wrote a new post 5 years, 2 months ago
It is with great sorrow that I report from California that Mr. Al Grouleff has passed away. Al was a long time Meyers 200 owner.
A bit of background information for the Meyers members who never had the
-
Mark Jensen started the topic landing gear placards/decals in the forum Landing Gear – Meyers 200 5 years, 3 months ago
Does anyone know of a source for landing gear placards? I need to replace those associated with my nose gear.
-
Tom Thibodeau and
Hugh Mattern are now friends 5 years, 4 months ago
- Load More