-
Ross Warner replied to the topic landing gear placards/decals in the forum Landing Gear – Meyers 200 5 years, 2 months ago
Hi Mark. I have most all the decals required for the 200 including what you need. I’m bringing samples to the fly-in but could mail anything you need. Call me at 269-369-1052 Ross Warner
-
Hinrik Hjaltason changed their profile picture 5 years, 2 months ago
-
Hinrik Hjaltason changed their profile picture 5 years, 2 months ago
-
Jim Jones replied to the topic Rocker Arm Grease for Warner 145 engines in the forum Engine – Meyers OTW 5 years, 2 months ago
Update on grease for the Warner 145. After my engine swallowed an exhaust valve two years ago, my protocol for greasing this engine has gone through a tremendous evaluation. I spent a great deal of time with my engine overhauler. While his forte is the Warner 165, he did some research on greases and their stability in the 145. He rebuilt my…[Read more]
-
Ed Pulliam replied to the topic Source/specs for replacement fuel caps? in the forum Airframe – Meyers 200 5 years, 2 months ago
Mark-I had the same issue several years back. My mechanic sourced alternative caps and used the rubber and replaced on the old caps.
-
John Secord and
Garry Elghammer are now friends 5 years, 2 months ago
-
Karen Wade wrote a new post 5 years, 2 months ago
A Zoom meeting was held last week with the elected officers of the Meyers Aircraft Owners Association (MAOA) along with two additional esteemed MAOA members to discuss the status of our annual Fly-In
-
Dean Siracusa replied to the topic Window and windshield 200D in the forum Airframe – Meyers 200 5 years, 3 months ago
Windows that are thicker than standard are also heavier, which is likely why there’s an issue with the FAA.
-
John Secord and
TC Gromer are now friends 5 years, 3 months ago
-
Richard E Russell replied to the topic tail wheel boots? in the forum Airframe – Meyers OTW 5 years, 3 months ago
Code 4, disregard my post – I have ‘particular’/thorough wrench and IA and that’s great – however, since I posted this, I’ve again realized, a tail boot for our OTW is rarely available. Although I do fly off grass, I just do a thorough pre-flight focused especially on the tail wheel area. It’s grear to have particular mechanics by the way!
-
Karen Wade replied to the topic tail wheel boots? in the forum Airframe – Meyers OTW 5 years, 3 months ago
Yes. We removed the tailwheel boots on “Fly Navy” to service the bearing and the rear suspension. I can trace if for you if you need me to.
-
Ed Pulliam replied to the topic Assets Of Meyers 200 Business in the forum General 5 years, 3 months ago
Terry-I did not know they were up for sale. Any details?
-
Ed Pulliam replied to the topic landing gear placards/decals in the forum Landing Gear – Meyers 200 5 years, 3 months ago
One thing my mechanic did 3 years ago when I had a FWF done (including nose gear) was to mark on the trunion and nose gear the limits in red lines so as to know what the maximum turn was with the nose gear in a ground based device (ie, not jacked up)
-
Ed Pulliam replied to the topic landing gear placards/decals in the forum Landing Gear – Meyers 200 5 years, 3 months ago
Mark-I think you are correct. Only one I think is required is the trim warning on the panel? Perhaps one of our A&P/IA brothers (or sisters) will comment.
-
Ed Pulliam replied to the topic Conversation in the forum Meyers 200 5 years, 3 months ago
Mark and Hans-nice to hear from both of you. Mark-thank you for the tidbits. Very helpful. I just need o practice more IFR procedures, even if I do VFR.
Hans-I remember our flight well and I had heard that you went to the fly-in. I too wonder what the outcome will be on gatherings, large and small, until a vaccine comes along.
I just landed…[Read more]
-
Karen Wade wrote a new post 5 years, 3 months ago
It is with great sorrow that I report from California that Mr. Al Grouleff has passed away. Al was a long time Meyers 200 owner.
A bit of background information for the Meyers members who never had the
-
John Secord and
Andy Nixon are now friends 5 years, 4 months ago
-
Ed Pulliam replied to the topic landing gear placards/decals in the forum Landing Gear – Meyers 200 5 years, 4 months ago
Mark-are their required placards??
-
Thomas Kube started the topic Noise certificate in the forum Meyers 200 5 years, 4 months ago
Does anybody have a noise certificate issued from the FAA or by someone else for the Aero Commander 200d with Standard prop an IO520a?
I need these data for EASA to issue one for my aircraft.PM or email me to thomas_kube@me.com
Thanks
Thomas
-
John Secord and
Hugh Mattern are now friends 5 years, 5 months ago
- Load More