-
Dean Siracusa and Joe Martony are now friends 2 years, 4 months ago
-
Dean Siracusa and Paul Bruk are now friends 2 years, 4 months ago
-
Dean Siracusa and Steve Ouellet are now friends 2 years, 4 months ago
-
Dean Siracusa and Jim Abbott are now friends 2 years, 4 months ago
-
Dean Siracusa and Don Gates are now friends 2 years, 4 months ago
-
Dean Siracusa replied to the topic *PAN PAN* Garmin GFC500 Available in Meyers 200! *PAN PAN* in the forum Avionics – Meyers 200 2 years, 4 months ago
The challenge of any other avionics shop doing this is their local FSDO approving it. Stein is a very large and professional avionics shop that goes above and beyond when doing avionics installations. This includes full wiring diagrams, so other places can do repairs or upgrades far easier. This is just one of the reasons why they’re able to get…[Read more]
-
Garry Elghammer and Mark Young are now friends 2 years, 4 months ago
-
Chris Blaine and Mark Young are now friends 2 years, 4 months ago
-
Chris Blaine replied to the topic *PAN PAN* Garmin GFC500 Available in Meyers 200! *PAN PAN* in the forum Avionics – Meyers 200 2 years, 4 months ago
Hi Ashley, I’m with Ed, what is that gonna set you back? I would love to get a GFC500. Heard nothing but extreme happiness from users. Where is Stein and is Stein the only folks that could do 337 field approval? If someone did it, can another region get away with it without copying their installation process exactly? Definitely an exciting…[Read more]
-
Chris Blaine replied to the topic Trio Avionics Pro Pilot Autopilot in the forum Avionics – Meyers 200 2 years, 4 months ago
Sounds like a good possibility to me. I would certainly be game. I am still in the market to upgrade my whole panel as well. Should have done it already, but had a severe six-figure water damage issue in my condo and needed to stand back for a while. We’re starting to recover from that and should get onto this avionics upgrade situation again…[Read more]
-
Ashley Wade replied to the topic *PAN PAN* Garmin GFC500 Available in Meyers 200! *PAN PAN* in the forum Avionics – Meyers 200 2 years, 7 months ago
Hello Thomas. There are so few of us that I doubt that anyone will do an STC, but the 337 process is moving along nicely after Peter. 2 more 200’s are currently being upgraded at Stein Air as I type. I am in line right behind them and hope to have her back with a shiny new GFC500 and twin GI275s for Christmas.
-
Jim Jones replied to the topic Aiecraft rigging in the forum General – Meyers OTW 2 years, 8 months ago
Jeff, glad to hear the Restoration is complete. If the rigging was done according to the manual, that is, it has the correct dihedral in the upper wing and all the control surfaces are set per the manual the only thing left is to make sure all wires are properly tightened and go fly it to see how it worked out. May need to adjust the trailing edge…[Read more]
-
Steve Bauman and Michael Barg are now friends 2 years, 8 months ago
-
Ashley Wade and Michael Barg are now friends 2 years, 8 months ago
-
Karen Wade wrote a new post, 2021 Fly-In for Fredericksburg is on Final Approach! 2 years, 8 months ago
The 2021 Fly-in for Fredericksburg is only two weeks away! Arrivals will begin Wednesday, September 22 at Gillespie County Airport (T82). We currently have over 40 members that have stated their intentions t
-
Karen Wade replied to the topic Parts in the forum Meyers 200 2 years, 8 months ago
Thank you Mark! We look forward to seeing you.
-
Jay McLeod and Ross Warner are now friends 2 years, 8 months ago
-
Tom Thibodeau replied to the topic Actuator Seals in the forum Hydraulic System – Meyers 200 2 years, 8 months ago
Gary,
The high pressure seal double seal I mentioned above is actually called an O-ring loaded U-cup seal. It is a harder rubber up with a softer O-ring inserted to push the cup against the shaft. The McMaster part number is 9505K15. I believe this is the seal that was in my flap selector and gear valves, but the harder rubber cup was…[Read more]
-
Tom Thibodeau replied to the topic Actuator Seals in the forum Hydraulic System – Meyers 200 2 years, 8 months ago
Gary,
Here are the O-ring part numbers for each of the M200 gear and the flap actuators:
3 each AN6227B-17 (MS28775-212)
1 each AN6227B-10 (MS28775-112)The flap and landing gear selector valve use the following seals
2 each MS2775-117
1 each 1161N52-204 . (They also have a reinforced high pressure double O-ring type seal, but it is a harder…[Read more] -
Tom Thibodeau replied to the topic Actuator Seals in the forum Hydraulic System – Meyers 200 2 years, 9 months ago
Gary,
I am currently on vacation and won’t be at my hangar until Labor Day weekend. I sent Robert Whitfield a complete set of seals, so he should have the part numbers. All are common O-rings available thru Aircraft Spruce, except the internal gear handle valve and flap selector valve. I found a compatible seal at McMaster Carr that is working f…[Read more] - Load More