@steve
-
Barry Sims started the topic in the forum Airframe – Meyers 145 9 years, 8 months ago
Does anyone have any experience servicing or repairing the trim control box / cable on the 1967 Meyers 200D?
Barry Sims
N2996T -
Richard E Russell became a registered member 9 years, 8 months ago
-
Joe Martony replied to the topic in the forum Steve Bauman 9 years, 8 months ago
Dean,
If you don’t hear from Don Petty in this forum, I’d give him a call. I’m sure he has dealt with this at some point. He knows of you through Jim Jellison.
He’s at 602.689.9414
Joe Martony
N2998T -
Dean Siracusa started the topic in the forum Light Weight Electrical Power for your OTW 9 years, 8 months ago
Does anyone have experience in servicing or repairing the fuel tank switch? I’m having some issues with it.
-
Mark Erwin started the topic in the forum Balancing control surfaces 9 years, 8 months ago
Looking for a little help … I’m getting ready to do a major panel upgrade on N236M, similar to what a few others have done. Included in the upgrade is a JPI EDM 930. The problem is that JPI won’t accept the part order without a 337 covering the installation for a Meyers 200. If anyone reading this has done such an installation, or if you know…[Read more]
-
John Secord changed their profile picture 9 years, 8 months ago
-
Mark Jensen replied to the topic in the forum Introduction and advice needed 9 years, 8 months ago
Joe,
Based on my experience this is an important modification. I lost throttle control during taxi for take off as a result of a screw that pulled out of its threads. This strew attaches a bracket for the throttle cable connection at the back of the engine. The screw was also nearly worn through. It is intended to allow a certain amount of…[Read more]
-
John Lyon replied to the topic in the forum Window and windshield 200D 9 years, 8 months ago
Mark, nothing like that in N489C.
-
Jamon Pruitt and
John Secord are now friends 9 years, 9 months ago -
Ashley Wade became a registered member 9 years, 9 months ago
-
Mark Young started the topic in the forum Light Weight Electrical Power for your OTW 9 years, 9 months ago
As I was replacing my battery this weekend, I noticed that there was a component attached in series to a circuit connecting both sides of the master relay that had degraded into a snowball.
It looks like an old style ceramic capacitor, about an inch and quarter long. Also included in the curcuit is (perhaps) a diode, and a fuse.
Someone…[Read more]
-
Mark Young replied to the topic in the forum Steve Bauman 9 years, 9 months ago
I’d also like to see a link to an on demand publisher.
-
Mark Young replied to the topic Restoration / Rebuilding – Meyers 200 in the forum Meyers 200 9 years, 9 months ago
Dean, I’m ordering some other stuff from Aircraft Spruce, so I figured I’d order the wing root fillet. is it listed as the beechcraft wingroot seal (http://www.aircraftspruce.com/catalog/appages/doorseals4.php?clickkey=4626)?
-
Dean Siracusa started the topic in the forum Airframe – Meyers 145 9 years, 9 months ago
I’m working on an updated version of the Meyers 200 Maintenance Manual and one thing we seem to be missing is an electrical system schematic. Does anyone have a copy of this?
-
Dean Siracusa replied to the topic 08T rt side in the forum Steve Bauman 9 years, 9 months ago
The A’s and B’s originally came with an IO-470 and had a lower VNE. In order to upgrade them to an IO-520a or IO-550f, there are stringers that need to be added to the empennage. And, once the additions are made, the VNE is increased to 236 mph. There are quite a few A and B owners who’ve upgraded their planes to both the IO-520a and IO-550f and…[Read more]
-
Dean Siracusa replied to the topic in the forum Steve Bauman 9 years, 9 months ago
That’s very troubling about Cee Bailey. I bought windows and windshields from them only a few years ago and didn’t have any issues.
As for the rear windows, be sure they know that you have a D model as even those windows are different than in the A’s and B’s.
Find out what the tooling costs will be and perhaps we can spread those costs over…[Read more]
-
Dan McLeod started the topic in the forum Balancing control surfaces 9 years, 10 months ago
I tried to get a windshield and windows from Cee Bailey. After a month they cancelled the order. Said they had tooling problems and offered no encouragement for the future. I did contact LP Aero. Contact: George. They have the tooling for the rear windows but you would need to send in the side windows and windshield to have tooling made. Fairly…[Read more]
-
Mark Erwin's profile was updated 9 years, 10 months ago
-
Mark Erwin became a registered member 9 years, 10 months ago
-
Joe Martony started the topic in the forum Light Weight Electrical Power for your OTW 9 years, 10 months ago
I’m told there is a recommended modification for the M200 that pulls the throttle to full open if the throttle cable breaks. Does anyone have the specs, parts list and technical drawing for the modification? Thanks, Joe Martony N2998T
- Load More
