Friends – Activity – Ross Warner – Meyers Aircraft Owners Association

Kevin McGinty started the topic Primer and Paint in the forum Painting Meyers 200 11 months, 2 weeks ago

I’m in the process of stripping the paint for refinishing. Not very easy I might add.

Could someone recommend a paint system? The original appears to be zinc chromate primer and enamel finish. I’ve heard that epoxy primer is an option to zinc chromate. Is this a better way to prime or should I source the zinc chromate version? Any sug…[Read more]
Kevin McGinty started the topic Airspeed indicator in the forum Restoration / Rebuilding – Meyers 200 12 months ago

Has any one had their original airspeed indicator re-faced?

Mine needs the faded green and white arcs re-colored as well as some of the numbers touched up or re-done. It is very faded and yellowed.

I was going to have it rebuilt and was curious if I could have it refaced as well.

Or would you suggest simply replacing it?
Kevin McGinty posted an update 12 months ago

Just wanted to thank all the wonderful Meyers owners I met over the weekend at the Rough River Dam Fly-in. I really enjoyed meeting all of you and having many of my endless questions answered. As a new part owner, the experience and information I received was fantastic. I only wish I could have stayed far longer, but I will look forward to the…[Read more]
Kevin McGinty replied to the topic Yoke leather wrap in the forum Restoration / Rebuilding – Meyers 200 1 year ago

Gary, the Aerocommander looks exactly like mine. Thank you.

Would you know if the autopilot disconnect switch must be incorporated into the wrap, or could a switch be added to the panel? That is if installing a new autopilot.

Thanks again,
Kevin
Tony Parsons changed their profile picture 1 year ago
Tony Parsons replied to the topic Annual Checklist in the forum Meyers 200 1 year ago

Send me your email and I will send to you
Steve Bauman replied to the topic Interior Lighting in the forum Interiors – Meyers 200 1 year ago

Kevin
Please send me your EMAIL ADDRESS will send you pictures of N2960T when Susan OLIVER had the airplane
STEVE BAUMAN

n2989t@hotmail.com
- Kevin McGinty replied 1 year ago
  
  Steve, if you didn’t receive my email, my address’s is: Kevin_mcginty@me.com
Steve Bauman replied to the topic Interior Lighting in the forum Interiors – Meyers 200 1 year ago

Kevin
STEVE BAUMAN -here– N2989T–Your airplane was SUSAN OLIVERS’S airplane N2960T. It had the blue two tone paint scheme. Would you want to go back to the original “N” number?
Steve
John Secord's profile was updated 1 year ago
Joseph Gibbons and John Secord are now friends 1 year ago
Tony Parsons and Joseph McDonald are now friends 1 year, 1 month ago
Tony Parsons started the topic Fuel Sender Unit in the forum Engine – Meyers 200 1 year, 2 months ago

I am needing to replace fuel floats/sender units. Has anyone done this? I have a part number for A/C delco part but has anyone replaced them with anything else? Part number? Where did you buy. Thanks!
Kevin McGinty replied to the topic Interior Lighting in the forum Interiors – Meyers 200 1 year, 2 months ago

Thanks Ross!

Cell: 216-701-5970
Kevin McGinty and Ross Warner are now friends 1 year, 2 months ago
- Kevin McGinty replied 11 months, 2 weeks ago
  
  Ross,
  I ordered 6 Whelen A315LO lights for under the glare shield. They should hopefully be very close to the lights in the pictures you sent me.
  
  Currently I’m in the process of stripping the exterior paint. All control surfaces have been removed as well as the wings, vertical stabilizer, horizontal stabilizer, door, and front wheel bay d…[Read more]
Kevin McGinty replied to the topic Interior Lighting in the forum Interiors – Meyers 200 1 year, 2 months ago

Thank you for clearing that up for me Ross.

I have started the restoration of N413KS, previously N427VV, and would like to maintain the original interior panel lighting operation if possible. We are installing 4 Garmin GI275 replacing the DG, AI, CDI, and an EIS. As these are backlit, this leaves only the airspeed, altitude, vertical speed,…[Read more]
Kevin McGinty replied to the topic Interior Lighting in the forum Interiors – Meyers 200 1 year, 2 months ago

Ross, thank you for the explanation.
Forgive my ignorance, when you refer to the glare shield, is that the overhang of the dashboard?
If so, mine must have been recovered at some point because I don’t have any lights at that location.
I do have some post lights that are above the top row of instruments, but they are wired with the red lights. T…[Read more]
Kevin McGinty started the topic Yoke leather wrap in the forum Restoration / Rebuilding – Meyers 200 1 year, 2 months ago

I’ve seen some very nice leather wraps on the 200D yokes. Could someone suggest who I may contact for this work? Wanted to re-due the ptt switch and possibly add an autopilot disengage switch.
Thanks,
Kevin
Kevin McGinty's profile was updated 1 year, 2 months ago
Kevin McGinty started the topic Interior Lighting in the forum Interiors – Meyers 200 1 year, 2 months ago

1966 200D: N413KS

Could someone be kind enough to explain how the original panel lights were arranged?

I have red post lights located over every instrument, controlled by the original dimmer/switch.

This dimmer also contains a second switch contact you can close for white lights. I don’t have any white lights, so I was curious as to the o…[Read more]
Tony Parsons and Gary Harber are now friends 1 year, 3 months ago
Load More