This topic has 6 replies, 3 voices, and was last updated 1 year, 3 months ago by Tom Thibodeau. Author Posts January 7, 2021 at 3:23 am #2139 Robert WhitfieldParticipant Needing to replace strut seals in my 200D needing source or an or ms part numbers. January 15, 2021 at 1:46 am #2148 Tom ThibodeauParticipant Robert, My notes from Bill Perry show: 2ea AN6230B-4 (MS28775-226) 1ea AN6227B-30 (MS28775-327) For all 3 gear struts. All are available at Aircraft Spruce. VR, Tom Thibodeau N2919T January 15, 2021 at 1:49 am #2149 Tom ThibodeauParticipant Robert, To clarify, each strut requires 3 seals as listed. If you are able to disassemble one strut, you can verify the dimensions prior to ordering. VR, Tom January 24, 2021 at 4:29 am #2163 Robert WhitfieldParticipant Tom, Thank you very much for your help. I just saw your message since I have been out of town for several days. Thanks again for your help, very much appreciated. Robert May 5, 2021 at 12:16 am #2249 Tom ThibodeauParticipant Robert, How is the strut rebuild progressing? Need any assistance? VR, Tom N2919T June 29, 2021 at 11:18 am #2290 Ed PulliamParticipant Tom-I am getting some pitting on my main gear struts. Are there replacements parts or can they be rechromed? Best- June 29, 2021 at 10:31 pm #2291 Tom ThibodeauParticipant Ed, I’ve been told they may be rechromed without creating any issues. Please contact Ross Warner to see about finding new old stock parts. He may be able to point you to someone who knows where to find them if you decide to go that route. VR, Tom Author Posts Viewing 7 posts - 1 through 7 (of 7 total) You must be logged in to reply to this topic.