@jburwe
-
J. Burwell posted a new activity comment 9 months, 1 week ago
Thank you for the information.
-
J. Burwell changed their profile picture 10 months ago
-
J. Burwell posted a new activity comment 11 months ago
These are the original brakes not hydraulic. I have tried to keep the plane as original as possible.
Thank you
-
J. Burwell started the topic Manual brakes in the forum Landing Gear – Meyers OTW 11 months, 1 week ago
Does anyone know where I could find information on adjusting manual brakes? The right will suddenly grab when pressure is applied. The left smoothly grabs as pressure is applied. My mechanic has “adjusted” them but there is no improvement.
Thank you
-
J. Burwell started the topic Aiecraft rigging in the forum General – Meyers OTW 1 year, 8 months ago
My OTW has finished being restored. There is a problem with the rigging in that the restoration AP IA has said it has been done according to the manual and set at nominal. Another AP said the rigging is to loose and not acceptable. Any advice/assistance would be appreciated.
-
J. Burwell's profile was updated 1 year, 8 months ago
-
J. Burwell started the topic Kinner 56 parts in the forum Engine – Meyers OTW 1 year, 10 months ago
Does anyone know whom i could contact to purchase kinner 56 parts including magnetos?
Thank you
-
Dean Siracusa and
J. Burwell are now friends 1 year, 12 months ago -
J. Burwell replied to the topic Wing walk area in the forum Restoration / Rebuilding – Meyers OTW 2 years, 6 months ago
Thank you, i have sent an email to Mr. Jones. I will let you know what the answer is once i find out.
Thanks again
Jeff
-
J. Burwell posted a new activity comment 2 years, 6 months ago
Thank you, i have the insturment panel finished. Could you tell me if the original wing walk area had an embossed aluminum panel on top of the wing panel?
Thank you -
J. Burwell started the topic Wing walk area in the forum Restoration / Rebuilding – Meyers OTW 2 years, 9 months ago
I am restoring # 19. The wing walk area has textured aluminum panel riveted to the wing panel. Is this original?
Thank you
-
J. Burwell started the topic Original paint schemes in the forum Restoration / Rebuilding – Meyers OTW 3 years, 1 month ago
I am looking for information on paint schemes for the early OTWs. I know many had unpainted fuselage but mine is to scuffed up to polish. Where there any painted from the factory? If so does anyone have informmation on colors?
Thank you
-
J. Burwell replied to the topic Original OTW insturment panel layout in the forum Avionics – Meyers OTW 3 years, 4 months ago
How much does the manual cost? Would you mund sending a picture of the rear cockpit. My front cockpit appears original. The rear cockpit is a mess. The insturment panel looks like swiss cheese.
Thank you very much
Jeff
-
J. Burwell replied to the topic Original OTW insturment panel layout in the forum Avionics – Meyers OTW 3 years, 4 months ago
I appreciate your help. Thank you
-
Jim Jones here. Do you have an OTW manual? It has drawings of both the front and rear panels in there. If you don’t have a manual, let me know and I can send you one. I can also send you pics of my panels in our OTW if that will help.
-
Thank you, i have the insturment panel finished. Could you tell me if the original wing walk area had an embossed aluminum panel on top of the wing panel?
Thank you
-
-
-
J. Burwell started the topic Original OTW insturment panel layout in the forum Avionics – Meyers OTW 3 years, 4 months ago
I am restoring a 1940 OTW and am looking for a picture or information on original insturment panel layout.
Thanks
Jeff
-
J. Burwell became a registered member 3 years, 8 months ago
