Michael Barg

Hello Paul. sorry for the delayed response. Been busy selling my company. I use the AC Air Technology remote control tracked tug. Works on concrete or on grass. Coolest thing ever. We have multiple planes and it moves all of them with no adjustment and it’s actually fun to reshuffle the hangar. Can hands free grab the Meyers 200, stuff it…[Read more]

Hi guys
The flight controls on the Meyers 200 do NOT need to be balanced when painted. They are controlled by push –pull rods. Aircraft that have control CABLES they are the ones that need to be balanced if painted.
This from the FAA.
Steve Bauman

Also on ANOTHER change to the IO550-F engine is the 2 bladed prop on the IO520-A is 82 inches, the IO550-F engine requires a 2 bladed prop to be 84 inches.

Hello Ed. My plane came with an Air Wolf Oil Filter Adapter when I bought her. 7 years of trouble free / Leak free service. I later purchased an Air Wolf AOS and the folks there were very helpful.

Greetings Scott. I would suggest an email to our own 200 parts guru Mr. Dave Smith at davesf17@yahoo.com.

Hello Steve. Please contact Dr. Jamon Pruitt. He’s a current 145 owner as well as 200 owner. He did a great job of upgrading his 145 and can tell you about parts availability. If you talk nice to him he might even part with his gorgeous 145…

jamonpruitt1@cox.net

Hello Joseph. Perhaps member Dave Smith could help you out. He has many NOS parts. Contact him at davesf17@yahoo.com ,

Hello Thomas. There are so few of us that I doubt that anyone will do an STC, but the 337 process is moving along nicely after Peter. 2 more 200’s are currently being upgraded at Stein Air as I type. I am in line right behind them and hope to have her back with a shiny new GFC500 and twin GI275s for Christmas.

Gary,

The high pressure seal double seal I mentioned above is actually called an O-ring loaded U-cup seal. It is a harder rubber up with a softer O-ring inserted to push the cup against the shaft. The McMaster part number is 9505K15. I believe this is the seal that was in my flap selector and gear valves, but the harder rubber cup was…[Read more]

Gary,

Here are the O-ring part numbers for each of the M200 gear and the flap actuators:

3 each AN6227B-17 (MS28775-212)
1 each AN6227B-10 (MS28775-112)

The flap and landing gear selector valve use the following seals
2 each MS2775-117
1 each 1161N52-204 . (They also have a reinforced high pressure double O-ring type seal, but it is a harder…[Read more]

Gary,
I am currently on vacation and won’t be at my hangar until Labor Day weekend. I sent Robert Whitfield a complete set of seals, so he should have the part numbers. All are common O-rings available thru Aircraft Spruce, except the internal gear handle valve and flap selector valve. I found a compatible seal at McMaster Carr that is working f…[Read more]

Jim Jones and Mike Barg at the Meyers OTW repair Center in South Carolina can help. You can reach them on the site by searching in the members directory. We’ll all be at the fly in next month in Fredericksburg, TX next month and that would be your very best bet. There are 5 OTWs in planned attendance. As long as your Kinner parts don’t have…[Read more]

Ed,

I’ve been told they may be rechromed without creating any issues. Please contact Ross Warner to see about finding new old stock parts. He may be able to point you to someone who knows where to find them if you decide to go that route.

VR, Tom

Ray,

So very happy to hear the damage was minimal given your scenario. Thank you for the additional information. I’m guessing the strut extended slightly once the gear was in the well to force the tire against the bail and cause it to bind. A very unusual situation to be certain.

You did an excellent 2 wheel landing and had a great outcome.…[Read more]

One additional tidbit…

A broken gear handle Uplock cable will be apparent because without the Uplock released, the gear UP red light will stay illuminated. Basically one red, two green would indicate the Uplock did not release on the gear indicating red. Instead of trying to find which cable to pull, raise the gear by putting the gear handle i…[Read more]

Ray,

So sorry to hear about your gear extension issues with 489C. As you are aware (but others may not be), your aircraft has a different gear indicating system than other M200s. 489C has a transit lights, where stock aircraft have UP (red) and DOWN (green) lights.

The Gear system of the M200 is quite simple: an engine driven hydraulic pump…[Read more]

Robert,

How is the strut rebuild progressing? Need any assistance?

VR, Tom
N2919T