-
Tom Thibodeau replied to the topic Actuator Seals in the forum Hydraulic System – Meyers 200 4 years, 2 months ago
Gary,
Here are the O-ring part numbers for each of the M200 gear and the flap actuators:
3 each AN6227B-17 (MS28775-212)
1 each AN6227B-10 (MS28775-112)The flap and landing gear selector valve use the following seals
2 each MS2775-117
1 each 1161N52-204 . (They also have a reinforced high pressure double O-ring type seal, but it is a harder…[Read more] -
Tom Thibodeau replied to the topic Actuator Seals in the forum Hydraulic System – Meyers 200 4 years, 2 months ago
Gary,
I am currently on vacation and won’t be at my hangar until Labor Day weekend. I sent Robert Whitfield a complete set of seals, so he should have the part numbers. All are common O-rings available thru Aircraft Spruce, except the internal gear handle valve and flap selector valve. I found a compatible seal at McMaster Carr that is working f…[Read more] -
Ashley Wade replied to the topic Kinner 56 parts in the forum Engine – Meyers OTW 4 years, 2 months ago
Jim Jones and Mike Barg at the Meyers OTW repair Center in South Carolina can help. You can reach them on the site by searching in the members directory. We’ll all be at the fly in next month in Fredericksburg, TX next month and that would be your very best bet. There are 5 OTWs in planned attendance. As long as your Kinner parts don’t have…[Read more]
-
Jay McLeod and
Greg Brown are now friends 4 years, 3 months ago -
Jay McLeod changed their profile picture 4 years, 3 months ago
-
Karen Wade wrote a new post 4 years, 3 months ago
Our annual Meyers Aircraft Owners Reunion and Fly-In is only two months away! We are looking forward to seeing everyone in beautiful Fredericksburg, TX. The dates are Wednesday, September 22, 2021 to S

-
Tom Thibodeau replied to the topic Landing Gear strut seals in the forum General- Meyers 200 4 years, 4 months ago
Ed,
I’ve been told they may be rechromed without creating any issues. Please contact Ross Warner to see about finding new old stock parts. He may be able to point you to someone who knows where to find them if you decide to go that route.
VR, Tom
-
Tom Thibodeau replied to the topic Meyers 200 Gear Failure in the forum Airframe – Meyers 200 4 years, 4 months ago
Ray,
So very happy to hear the damage was minimal given your scenario. Thank you for the additional information. I’m guessing the strut extended slightly once the gear was in the well to force the tire against the bail and cause it to bind. A very unusual situation to be certain.
You did an excellent 2 wheel landing and had a great outcome.…[Read more]
-
Mark Jensen replied to the topic Meyers 200 Gear Failure in the forum Airframe – Meyers 200 4 years, 4 months ago
Sorry to hear about your gear problem. My partner and I had a nose gear up landing which I also attributed to a problem with the strut. We bought the aircraft after an estate settlement and then had it down for about a year replacing the interior and glass. Because it sat for (?) years, it was difficult to service the strut to the proper…[Read more]
-
Tom Thibodeau replied to the topic Meyers 200 Gear Failure in the forum Airframe – Meyers 200 4 years, 4 months ago
One additional tidbit…
A broken gear handle Uplock cable will be apparent because without the Uplock released, the gear UP red light will stay illuminated. Basically one red, two green would indicate the Uplock did not release on the gear indicating red. Instead of trying to find which cable to pull, raise the gear by putting the gear handle i…[Read more]
-
Tom Thibodeau replied to the topic Meyers 200 Gear Failure in the forum Airframe – Meyers 200 4 years, 4 months ago
Ray,
So sorry to hear about your gear extension issues with 489C. As you are aware (but others may not be), your aircraft has a different gear indicating system than other M200s. 489C has a transit lights, where stock aircraft have UP (red) and DOWN (green) lights.
The Gear system of the M200 is quite simple: an engine driven hydraulic pump…[Read more]
-
Phil W. Hart replied to the topic Source/specs for replacement fuel caps? in the forum Airframe – Meyers 200 4 years, 4 months ago
I have he manufacturing data for the updated fuel filler necks. Will be glad to share if you will send your email.
doctorphil@bellsouth.net -
Tom Thibodeau replied to the topic Landing Gear strut seals in the forum General- Meyers 200 4 years, 5 months ago
Robert,
How is the strut rebuild progressing? Need any assistance?
VR, Tom
N2919T -
Tom Thibodeau replied to the topic News – Announcement in the forum Meyers 200 4 years, 5 months ago
Ashley,
This is certainly amazing news!!! The G500 is a very capable unit and should provide years of reliable service for you and other M200 drivers. Sure would fit well into my Garmin stack …
VR, Tom
N2919T -
Tom Thibodeau replied to the topic 200D vs Super Viking in the forum General- Meyers 200 4 years, 5 months ago
Stefano,
Where do you visit in FL? We have several owners in the state that may be able to assist with your quest…
VR, Tom
-
Tom Thibodeau replied to the topic Meyers 200 vs Bonanza in the forum Meyers 200 4 years, 5 months ago
James,
Welcome to the Meyers website. You’ll quickly discover most Meyers owners are very proud of their aircraft. These machines are members of their families, and tend to stay with their caretakers for many years. We’ve cherished N2919T for 21 years, and acquired it from a gentleman and his wife who cared for it for nearly 30 years. The air…[Read more]
-
Jamon Pruitt replied to the topic Flying a Meyers 145 in the forum Meyers 145 & Micco SP20/SP26 4 years, 6 months ago
Hi guys haven’t checked in but following the line the 145 is a bit tight I’m 5’11” and have just enough room to clear a headset My bird is 210hp which is really the best the bird is pretty heavy for a 2 seater grossing out at 2200lbs the useful load is not a problem i have 4 tanks 2 16gal mains and 2 8.5 gal auxs and can carry 2 200lbs…[Read more]
-
Mark Jensen replied to the topic Door lock replacement in the forum Airframe – Meyers 200 4 years, 6 months ago
Thomas,
Sorry,I haven’t been on this part of the forum lately. I will check with my mechanis next week to get that info in case you still need it.
Mark -
Ashley Wade replied to the topic "name" for your Meyers when talking to ATC? in the forum General- Meyers 200 4 years, 6 months ago
Joseph, I do same as you and say ICAO Mike two zero zero. But I would NEVER say similar to a Bonanza! Almost as bad as saying similar to a Cirrus! Yuk!
On long cross countries switching service areas ATC does morph me into a Mooney as per Ed on occasion. I do take exception with THAT as well, but just motor on along and respond back with…[Read more]
-
Ashley Wade replied to the topic TruTrak Autopilot for Meyers 200 in the forum Avionics – Meyers 200 4 years, 6 months ago
Anyone interested in an autopilot needs to view the thread by Mr. Peter Jensen titled “News Update”.
Stein Air is installing Garmin GFC500s into Meyers 200s. Details on the other post.
- Load More