-
Ed Pulliam replied to the topic N418 in the forum Meyers 200 1 year, 6 months ago
Are you not bringing back the South Africa bird Rocky?
-
Andy Nixon replied to the topic For sale and other questions in the forum Meyers 200 1 year, 6 months ago
Rocky,
The guy in Auburn is Joseph McDonald. I don’t have a number for him, but we chat via Facebook.
Andy
-
TC Gromer started the topic Spool Valve/Shuttle Valve in the forum Airframe – Meyers 200 1 year, 7 months ago
Looking for part numbers for seal replacement, ours is leaking around the shaft. Thanks for any help
TC -
Ed Pulliam replied to the topic N418 in the forum Meyers 200 1 year, 7 months ago
Looks like a good bird. If you guys pass let me know. I think your pricing logic makes sense.
Best-
-
Ed Pulliam replied to the topic N418 in the forum Meyers 200 1 year, 7 months ago
Thanks Rocky. I hope it goes to someone who intends to get her flying again. They are too nice, and too rare, to be rotting away.
Best-
Ed
-
Ed Pulliam replied to the topic N418 in the forum Meyers 200 1 year, 7 months ago
Rocky-is there a link for this bird? I would love to at least check it out. Is it an estate auction?
-
Jamon Pruitt and Joseph McDonald are now friends 1 year, 7 months ago
-
Jamon Pruitt and Chris Hudson are now friends 1 year, 7 months ago
-
Jamon Pruitt and Rocky Roquemore are now friends 1 year, 7 months ago
-
Hinrik Hjaltason and Garry Elghammer are now friends 1 year, 7 months ago
-
Thomas Kube replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 1 year, 7 months ago
We adjusted low Pitch stop to maximum but no RPM rise. The linkage itself is quite simple to a adjust, but that is not the problem. I will measure the low pitch angle to check for a wear of the propeller. Last overhaul was 2009 and last maintenance was 2020, lubricaction of the hub.
A month before my Mitchell tach showed a malfunction, an…[Read more]
-
Ed Pulliam replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 1 year, 7 months ago
I have the same problem, but my A&P thinks it is related to the linkage to the governor. Like it is not long enough to get that extra 100 RPM and will need some modification. I am going to address over the winter.
Ed
-
Andy Nixon replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 1 year, 7 months ago
Thomas,
I was having the same issue with N430DP this summer. I had it removed and sent to the prop shop for bench testing and had the springs replaced. They ran it for 2 hours on the bench with no issues, but I’m still only reaching 2600 RPM on takeoff.
Andy
-
Ed Pulliam replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 1 year, 7 months ago
Well, that was not my intent, but glad you did not spend money on something that was not approved.
I saw the note on your exhaust valve. That’s THE reason for borescopes.
Best-
Ed
-
Thomas Kube started the topic Exhaust valve failure and rotators in the forum Engine – Meyers 200 1 year, 7 months ago
Howdy from Germany,
the last annual reveiled a bad looking exhaust valve on No.3 and the guide had some blowby. Reason was a malfunctioning rotator.
My engine is am Continental remanufacture from 1993 with about 550 hours on it.
There seems to be a problem with this rotators and I suggest that you have a good look at yours valves, especcially if…[Read more] -
Thomas Kube replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 1 year, 7 months ago
Hi Ed, do you see the hole in my foot? I almost shot me one…
No STC for our airplanes and no EASA Approval either. I will have to have him overhauled.Thanks for pointing my nose to this minor bureaucratic problem…
Thomas.
-
Ed Pulliam replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 1 year, 8 months ago
Thomas-that looks like a good solution to deal with the older ones we have as they go bad. Any idea how the STC would work?
Best-
Ed
-
Thomas Kube started the topic Propeller Governor bad in the forum Engine – Meyers 200 1 year, 8 months ago
Hi fellow Meyers owners,
My propeller governor is defect. I just get 2550 rpm on static or dynamic take off.
All the other performance data are okay.
I found as an alternative to overhauling the governor is to put a new PCU5000 on the engine.
Any recommendations from y’all?
Thanks and a have great day,
Thomas
-
Andy Nixon replied to the topic Meyers 200 vs Bonanza in the forum Meyers 200 1 year, 8 months ago
Welcome to the group!
Andy
-
Andy Nixon replied to the topic Performance in the forum Airframe – Meyers 200 1 year, 8 months ago
John – I typically climb at around 800-1,000 FPM and 120mph on a summer day in Michigan. I plan on burning 22-24gph during my climb. I use N430DP for mostly cross-country flights. When in a cruise around the 7,500-10,500 altitude range I usually average and plan for 200mph with a fuel burn of 14-15gph. The plane has the IO525 engine with Gami…[Read more]
- Load More