Friends – Activity – Jacob Kingsley – Meyers Aircraft Owners Association

Ed Pulliam replied to the topic N418 in the forum Meyers 200 2 years, 12 months ago

Looks like a good bird. If you guys pass let me know. I think your pricing logic makes sense.

Best-
Ed Pulliam replied to the topic N418 in the forum Meyers 200 2 years, 12 months ago

Thanks Rocky. I hope it goes to someone who intends to get her flying again. They are too nice, and too rare, to be rotting away.

Best-

Ed
Ed Pulliam replied to the topic N418 in the forum Meyers 200 3 years ago

Rocky-is there a link for this bird? I would love to at least check it out. Is it an estate auction?
Jamon Pruitt and Joseph McDonald are now friends 3 years ago
Jamon Pruitt and Chris Hudson are now friends 3 years ago
Jamon Pruitt and Rocky Roquemore are now friends 3 years ago
Hinrik Hjaltason and Garry Elghammer are now friends 3 years ago
Thomas Kube replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 3 years ago

We adjusted low Pitch stop to maximum but no RPM rise. The linkage itself is quite simple to a adjust, but that is not the problem. I will measure the low pitch angle to check for a wear of the propeller. Last overhaul was 2009 and last maintenance was 2020, lubricaction of the hub.

A month before my Mitchell tach showed a malfunction, an…[Read more]
Ed Pulliam replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 3 years ago

I have the same problem, but my A&P thinks it is related to the linkage to the governor. Like it is not long enough to get that extra 100 RPM and will need some modification. I am going to address over the winter.

Ed
Ed Pulliam replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 3 years ago

Well, that was not my intent, but glad you did not spend money on something that was not approved.

I saw the note on your exhaust valve. That’s THE reason for borescopes.

Best-

Ed
Thomas Kube started the topic Exhaust valve failure and rotators in the forum Engine – Meyers 200 3 years ago

Howdy from Germany,
the last annual reveiled a bad looking exhaust valve on No.3 and the guide had some blowby. Reason was a malfunctioning rotator.
My engine is am Continental remanufacture from 1993 with about 550 hours on it.
There seems to be a problem with this rotators and I suggest that you have a good look at yours valves, especcially if…[Read more]
Thomas Kube replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 3 years ago

Hi Ed, do you see the hole in my foot? I almost shot me one…
No STC for our airplanes and no EASA Approval either. I will have to have him overhauled.

Thanks for pointing my nose to this minor bureaucratic problem…

Thomas.
Ed Pulliam replied to the topic Propeller Governor bad in the forum Engine – Meyers 200 3 years ago

Thomas-that looks like a good solution to deal with the older ones we have as they go bad. Any idea how the STC would work?

Best-

Ed
Thomas Kube started the topic Propeller Governor bad in the forum Engine – Meyers 200 3 years ago

Hi fellow Meyers owners,

My propeller governor is defect. I just get 2550 rpm on static or dynamic take off.

All the other performance data are okay.

I found as an alternative to overhauling the governor is to put a new PCU5000 on the engine.

Any recommendations from y’all?

Thanks and a have great day,

Thomas
Ross Warner and Andy Nixon are now friends 3 years, 1 month ago
Ed Pulliam replied to the topic Type certificate in the forum Meyers 200 3 years, 1 month ago

Rocky-on Mike Hofman’s girl?
- Rocky Roquemore replied 3 years, 1 month ago
  
  No someone has put in to buy the meyers 200 and 400 type certificates
Karen Wade wrote a new post 3 years, 1 month ago

The 2022 fly-in at KVBT is less than a month away! Our host hotel, the Double Tree Suites by Hilton Hotel Bentonville, still has a few rooms available for our preferred rate of $169 per night. They can be
Ed Pulliam replied to the topic Performance in the forum Airframe – Meyers 200 3 years, 2 months ago

John-I was at OSH for a couple of days last week and looked for my 200 brethren, but did not dig too hard. Tell Ross hello. F 35’s and F 18’s were awesome!!

I own 196M, which is a 1964 C model. It has a IO 520 factory remain installed Jan 2017 with GAMI’s. I do not do a lot of long distance cross country so I rarely climb above 5K and…[Read more]
Ed Pulliam replied to the topic Searhing for a 200d in the forum Meyers 200 3 years, 2 months ago

Jump in Rocky! Be nice to get that one back to the States.
Karen Wade wrote a new post 3 years, 3 months ago

Attention all Meyers aircraft owners and enthusiasts! If you are planning to attend EAA Air Venture this year, MAOA will be gathering at Wend’t on the Lake for supper on Thursday, July 28 at 7 p.m. Wendt’s i
Load More